Cryorig Updates High-Performance Cooling Hardware and Launches PC Case with 13 HDD Bays at Computex 2026

While Cryorig debuted a very interesting semi-passively cooled PC case at Computex 2026, the company also featured its fresh line-up of active cooling hardware, including the new H6 CPU cooler, a sizeable E-ATX PC case designed for workstation and AI use, and its recently updated Cryo360 AIO liquid cooler. The H6 CPU cooler is the latest in Cryorig’s line of budget CPU air coolers that would compete in the same market as the Cooler Master Hyper 212 series. The H6 has a pure copper base with six heat 6 mm pipes and a total footprint of 122 × 69 × 148 mm, meaning it should have wide case compatibility, thanks to the low total height.

The H6 is compatible with Intel sockets going back to LGA 115X (meaning LGA 115X, 1200, 1366, 1700, and 1851, while AMD is limited to AM4 and AM4. Cryorig clams that the new cooler operate as quietly as 31.5 dBA. Cryorig also showed off its dual-tower Gladius Astral CPU air cooler, which has a small display on the top for system metrics, and its Cryo360 CPU liquid cooler, which, as the name suggests, is a 360 mm AIO cooler with a ceramic shaft core water block and a round display on the top of it. The Cryo360 has a 27 mm thick radiator and ships with three PWM fans capable of delivering 61.24 CFM airflow at 900-2,000 RPM, with noise performance claims of as little as 32.2 dBA.

In addition to the CPU cooling hardware, Cryorig also revealed the AI-100 high-performance PC case that appears to be oriented towards high-end workstation or server use-cases. The AI-100 measures 526 × 245 × 545 mm and supports up to E-ATX motherboards, GPUs up to 445 mm long, CPU coolers up to 185 mm tall, and PSUs up to 175 mm long. Internally, there are 16 bays for 3.5-inch (or 2.5-inch) drives, mounting points for 13 fans, and 10 PCIe expansion slots. The case also supports up to a 480 mm radiator in the top position or a 360 mm radiator in the front position. The AI-100 case’s performance intentions are also telegraphed by its apparent performance focus. All the fan mounts are behind open grilles for maximum airflow, and the case has plenty of exhaust space where fans cannot be installed, which would make it a good contender for a positive pressure setup. The AI-100 case also has a vertical support pillar mounted in front of the right side panel, opposite the motherboard, where it has three GPU support brackets installed to prevent sag. The front panel I/O on the AI-100 consists of dual USB 3.0 Type-C ports, a single USB Type-C 3.2 Gen 2 port, and a 3.5 mm audio jack.